USB-RS232-WE-1800-BT-3.3 USB to RS232 Cable Adapter FT232RQ Chip USB Serial Cable with TXD,RXD LED Compatible with Windows 11 10 8 7 Linux MAC OS(RED Wire is 3.3V)

Description 1. The USB_RS232 cables are a family of USB to RS232 levels serial UART converter cables incorporating FT232RQ USB to serial UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a RS232 level serial UART interface to USB. 2. Each USB-RS232 cable contains a small internal electronic circuit board, utilising the FT232RQ, encapsulated into the USB connector end of the cable,is available www.ftdichip.shop.The integrated electronics also include the RS232 level shifter plus Tx and Rx LEDs which give a visual indication of traffic on the cable (if transparent USB connector specified). 3.The other end of the cable is bare, tinned wire ended connections by default, but can be customised using different connectors to support various applications. 4.The USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.8m long and supports a data transfer rate up to 3 Mbaud. Each cable supports the FT232R-ID, with a unique USB serial number programmed into the FT232RQ. This feature can be used to create a security or password protected file transfer access using the cable. 5.The USB-RS232 cables require USB drivers,which are used to make the FT232RQ in the cable appear as a virtual COM port (VCP). This then allows the user to communicate with the USB interface via a standard PC serial emulation port (for example TTY). Another FT232 USB driver, the D2XX driver, can also be used with application software to directly access the FT232RQ on the cable though a DLL.

• ✔️USB-RS232-WE-1800-BT-0.0 Cable provides Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking，UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
• ✔️Plug and Play,6 way outputs provide TXD(Orange), RXD(Yellow), RTS(Green), CTS(Brown), VCC(Red)，GND(Balck),USB-RS232-WE-1800-BT-3.3 = RED wire is 3.3V
• ✔️Visual indication of Tx and Rx traffic via LEDs in the transparent USB connector，Data transfer rates from 300 baud to 3 Mbaud,Internal EEPROM with user writeable area.
• ✔️FT232RQ VCP allow for communication as a standard emulated COM port and D2XX ‘direct’ drivers provide DLL application programming interface.
• ✔️Cable length is 1.80m (6 feet),USB 2.0 Full Speed compatible,-40°C to +85°C operating temperature range.