SUNLU 3D Printer Filament PLA Plus 1.75mm, SUNLU Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, Sky Blue+Green, 1KG*2 Spools

FAQ: ● Why can't the filaments stick to the build bed easily?● Please do 3 steps checking！① TemperaturePlease check the temperature(bed and nozzle) settings before printing and set it suitable.② Building BedPlease check if the bed is level, make sure the nozzle doesn't too far or too close to the bed.③ SpeedPlease check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s).Recommended Settings:● Nozzle 210°C - 235°C (410°F - 455°F)● Bed 70°C - 80°C (158°F - 176°F)● Printing Speed: 40-80(mm/s)● These settings are for 0.4mm nozzle, it may be different with different diameters nozzleNotes● Please insert the filament into the side holes after use to avoid tangles.● Feel free to message us if you have any questions about the filament.● Please stored the 3D printer filament in a sealed bag or box after using it.

• 🎄【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
• 🎅【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
• 🎄【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
• 🎅【Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
• 🎄【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F).