Megger MIT200 Digital/Analog Hand-Held Insulation and Continuity Tester, 500V Test Voltage

The MIT200 is one of the smallest insulation testers available on the market today. With options of one, two and three voltage test voltage instruments, the instrument offer a range of safety and operation features. The display offers a combination of digital readout and analog display, using Megger’s patented DART display technology, which includes the benefits of an LCD display, such as robust, clear and accurate measurement, with an analog pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS, designed to withstand the rigours of hard use, and is small enough to drop into your pocket when not in use. Digital display of insulation measurement up to 1000 M Ohms on a logarithmic Analog arc and a digital display. Continuity range has 0.01 Ohms resolution and a short circuit current in excess of 200 mA. Automatic continuity testing leaves both hands free. No need to press the test button. Automatic power-off if left unattended reduced wasted battery life. Automatic voltage detection avoids accidental contact with live circuits. Buzzer range operates at <2 Ohms. Measuring range: 10 k Ohms - 1000 M Ohms on all ranges. Operating range: -10 degree C to +55 degree C (14 degree F to 130 degree F). Environmental protection: IP40. Fuses terminals: 500 mA (F) 600 V, 32 x 6 mm ceramic HBC 50 kA minimum. Display shows if fuse is ruptured. Safety: meets the requirements of EN61010-1 Cat III 600V phase to earth. Automatic discharge: After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored. Power supply: Battery 6 x 1,5 V cells IEC LR6 type(AA alkaline). Rechargeable NiMH cells may be used. Battery life: 3000 consecutive tests (5 seconds per test) on any test using 2Ah batteries. Weight: 550gms approx. (1.2lbs). Measures 7.7" length by 3.9" width by 1.6" height. E.M.C: in accordance with IEC61326-1.

• Insulation testing to 1000 M Ohm
• Continuity testing at 200 mA down to 0.01 Ohm
• Live circuit warning (voltage display) and test inhibit
• Digital/Analog display
• Alkaline or rechargeable batteries