INTBUYING 16x24" Heat Press Machine Manual Clamshell Flat Transfer Sublimation Machine Printing

Description <br>Digital flat heat press machine is designed for printing textiles and other materials may be used on food, t-shirts, mouse pads, puzzles, ceramic tiles, and other flat surfaces items by using the flex, flocking, transfer printing paper, sublimation etc. <br>The heat press is equipped with a manual override, a digital display, and a sound signal at the end of work. <br> <br>Parameter <br>Size: 16x24in/40*60cm <br>Voltage: 110V <br>Power: 1800W <br>Time range: 0s-999s <br>Max temp: 0-250℃(482℉） <br>Controller: Digital Time &amp; Temperature on one control <br>Package size: 27.95*27.17*16.14in <br>Gross weight: 69.63LB <br> <br>Please comply with these instructions: <br>1. Do not put the wire on heating plates cover. <br>2. Do not touch heating plates when heating up. Caution: Risk of burns. <br>3. Do not open the machine box and make changes to the device. <br>4. Do not allow liquid or metal objects inside the hot press. <br>5.Make sure the machine is connected with a plug connected to the mass. <br>6.Power off the machine when finish using. <br> <br>Using method <br>1.set pressure <br>Adjust pressure at the top of the tray in a clockwise direction to increase pressure and in the opposite direction to decrease by turning the knob. <br>2.set temperature&amp;time <br>Press on the on / off switch located on the side of the heat press to be energized. <br>Press once on the "OK", screen show "P-1" on the display. Press “▼”or “▲” to the desired temperature. <br>Press once again on "OK", screen show "P-2" on the display. <br>Press “▼”or “▲” to the desired time. <br>Press “OK” again after finish all setting to come out setting mode. <br>Put objects when the machine has reached the desired temperature, close heating plates, waiting time. <br>When times up, machine will ringing, then lift heating plates, take out printing items <br> <br>Item included: 003450 <br>INTBUYING 16x24" Heat Press Machine Manual Clamshell Flat Transfer Sublimation Machine Printing <br>

• 【PRESSING SIZE】 - This heat press machine adopts the 16X24inch heat plate, which is larger than normal machines on market, and it is high cost-effective for use and long production runs. It adopts thickened stainless steel heating board, which makes printing safer.
• 【DIGITAL DISPLAY】 - Manual clamshell flat heating machine is Equipped with digital display, beautiful and generous. Simple temperature and time setting, simple operation and convenient use
• 【CLAMSHELL DESIGN】- This sublimation transfer printer applies to clamshell design. When pressed down, it provides industrial strength, pressure and temperature, guaranteeing the transfer to last on the consumables. It is equipped with a pressure adjusting nut, which can adjust the pressure by hand and effectively improve the work efficiency.
• 【TEMPERATURE】 - The temperature can be adjusted from 0℃ to 250℃(0-482℉). Put objects when the heating printing machine has reached the desired temperature, close heating plates, waiting time. When times up, machine will ringing, then lift heating plates, take out printing items.
• 【INSULATION PADS】 - The heat press is equipped with two layers of gaskets. The silicone pad is elastic and can achieve the best pressure balance and transmission effect; The lower layer is filled with a heat-resistant sponge pad made of composite cotton. Silicon gel substrate, not fully bonded, easy to replace.
• 【HIGH PERFORMANCE】 - The digital heat press machine is easy to operate and has professional effects. You can adjust the pressure of the hot press according to the thickness of the consumables, and there is a pressure adjustment knob to support this work.
• 【APPLICATION】 - The transfer machine is designed for printing textiles and other materials. Through the use of flexibility, flocking, transfer paper, sublimation, etc., it can be used for food, T-Shirts, mouse pads, puzzles, tiles and other planar items.