48” Hardwired Power Strip (NO Power Cord), 12 Vertical Outlets (NOT Tamper Resistant), with Ears (with mounting tabs on Both Ends), 15A (NOT 20 Amp), White

48” Hardwired Power Strip with 12 Outlets - * NOTE: Measurement is approximate: For installation purpose, the length of the power strip unit does not include ears, (mounting tabs - 0.63" / 16mm on each end). For models with ears, 2 x 0.63" / 16mm need to be added to the product length in the dimension listed above; the width does not include the size of screws (min. 0.06" / 1.5mm) on each side; the height (or thickness) does not include the receptacles (Regular Outlets: 0.19" / 4.9mm; TR Outlets: 0.25｡6.3mm) above the surface of the casing. - SAFETY WARNING: - Installation work of this unit must be done by a professional, a licensed electrician or an electric engineer. - Never install this unit during a thunder storm. - Switch off the power before you start installation work. - This unit is for indoor use only. - This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.

• 48” / 1.22m Hardwired Power Strip, 12 Vertical (NEMA 5-15R, NOT Tamper Resistant) Outlets, White
• With EARS on both Ends, Total Length 49.33” / 1253mm
• Measurement: L48″ x W1.61″ x H1.35″ (1219 x 41 x 34.4mm); Casing/Outlet Height: 1.16"/0.19" (29.5/4.9mm)
• No Power Cord - Hardwired and to be Mounted at Your Desired Location. Installation Instruction Included
• Electrical Ratings: 125V/15A/60Hz/Recommended Max Load 1440W (NOT a 20A Unit)
• ETL Approved and Listed (Conforms to UL 5 and CAN/CSA C22.2 No. 62)
• 6 Easily Punched off Knockouts, 1 on Each Side – (Top/Bottom Cover, Both Sides/Ends)
• Great for Contractors, Electricians and Installers, as well as DIYers